KTM 2013 450 Rally Factory Replica, Owner'S Manual

Page: 45 / 126

11 SERVICE WORK ON THE CHASSIS
43
11.9 Installing the fork legs
x
601334-10
Main work
–
Position the fork legs.
Info
The upper triple clamp must be flush with the upper edge of the fork legs.
Position bleeder screws
1
toward the front.
601338-11
–
Tighten screws
2
.
Guideline
Screw, top triple clamp M8 17 Nm
(12.5 lbf ft)
–
Tighten screws
3
.
Guideline
Screw, bottom triple clamp M8 12 Nm (8.9 lbf ft)
–
Secure the brake line with cable binder
4
.
601339-11
–
Position the brake caliper. Mount and tighten screws
5
.
Guideline
Screw, front brake caliper M8 30 Nm
(22.1 lbf ft)
Loctite ® 243™
Finishing work
–
Install the front fender. ( p. 41)
–
Mount the front wheel.
x
( p. 67)
11.10 Removing the lower triple clamp
x
Preparatory work
–
Raise the motorcycle with the lift stand. ( p. 40)
–
Remove the front wheel.
x
( p. 67)
–
Dismount the front fender. ( p. 41)
–
Remove the fork legs. x ( p. 42)
601389-10
Main work
–
Remove screw
1
.
–
Allow the brake caliper and brake line to hang tension-free to the side.
601342-10
–
Remove screws
2
. Remove the holding plate with handlebar clamps.
–
Remove screws
3
. Remove steering damper
4
.