KTM 2009 690 Rally Factory Replica, Owner'S Manual

Page: 14 / 104

CONTROLS
12
–
Press the button for 3 - 5 seconds.
The settings are saved and the Setup menu closed.
Info
If no button is pressed for 20 seconds, or if no impulse comes from the
wheel speed sensor, the settings are automatically saved and the Setup
menu closed.
4.14
Adjusting the speedometer functions
Info
Upon delivery, only the
SPEED/H
and
SPEED/ODO
display modes are activated.
Condition
The motorcycle is standing.
400318-01
–
Press the button briefly and repeatedly until H appears at the bottom right of the
display.
–
Press the button for 3 - 5 seconds.
The Setup menu opens and the active functions are displayed.
–
Switch to the function you require by briefly pressing the button .
The selected function flashes.
Activating a function
–
Press the button .
The icon remains in the display and the display changes to the next func-
tion.
Deactivating a function
–
Press the button .
The icon disappears from the display and the display changes to the next
function.
–
Activate or deactivate all functions accordingly.
–
Press the button for 3 - 5 seconds.
The settings are saved and the Setup menu closed.
Info
If no button is pressed for 20 seconds, or if no impulse comes from the
wheel speed sensor, the settings are automatically saved and the Setup
menu is closed.
4.15
Querying the lap time
Info
This function can be called only if lap times are measured.
Condition
The motorcycle is standing.
400321-01
–
Press the button briefly and repeatedly until LAP appears at the bottom right of
the display.
–
Press the button briefly.
LAP 1 appears on the left side of the display.
–
Laps 1-10 can be displayed by pressing the button .
–
The button has no function
–
Press the button briefly.
Next display mode
Info
If an impulse is received from the wheel speed sensor, the left side of the
display changes back to the
SPEED mode.