KTM 1290 Super Duke GT Owner'S Manual Download

Page: 94 / 353

7 COMBINATION INSTRUMENT

7.31.4

Navigation setup (optional)

S03126-01

Condition

• Function

KTM MY RIDE

activated (optional).

• The

KTM MY RIDE

app (optional) is installed and opened on a

suitable cellphone (Android devices Version 6.0 and higher,
iOS devices Version 10 and higher).

• The combination instrument is connected to a suitable cell-

phone.

• The GPS function is activated on the connected cellphone.

–

Press

SET

button when the menu is closed.

–

Press

DOWN

button until

KTM MY RIDE

is marked. Press

SET

button to open the menu.

–

Press

DOWN

button until

Navigation

is marked. Press

SET

button to confirm the selection.

–

Press

DOWN

button until

Navigation Setup

is marked.

Press

SET

button to open the menu.

–

Press

or the

DOWN

button until the desired navigation

mode

Voice Navigation

Turn by Turn

is marked.

–

Press

SET

button to confirm the selection.

Summary of Contents for 1290 Super Duke GT


































































































































































































































































































































































Search results

Summary of Contents for 1290 Super Duke GT

Reviews:

Related manuals for 1290 Super Duke GT

Brands by name

Popular brands

KTM 1290 Super Duke GT, Owner'S Manual

Search results

Summary of Contents for 1290 Super Duke GT

Reviews:

Related manuals for 1290 Super Duke GT

Brands by name

Popular brands