KTM 1290 Super Duke GT Owner'S Manual Download

Page: 194 / 353

13 SERVICE WORK ON THE CHASSIS

192

13.6

Mounting the passenger seat

402652-10

–

Attach hooks on the passenger seat to seat mounts

–

Lower the front of the passenger seat and push back.

–

Position locking pin

in the lock housing and press passen-

ger seat down at the front.

The locking pin engages with an audible click.

–

Check that the passenger seat is mounted correctly.

13.7

Removing the front rider's seat

Preparatory work

–

Remove passenger seat. (

p. 191)

Summary of Contents for 1290 Super Duke GT


































































































































































































































































































































































Search results

Summary of Contents for 1290 Super Duke GT

Reviews:

Related manuals for 1290 Super Duke GT

Brands by name

Popular brands

KTM 1290 Super Duke GT, Owner'S Manual

Search results

Summary of Contents for 1290 Super Duke GT

Reviews:

Related manuals for 1290 Super Duke GT

Brands by name

Popular brands