KTM 125 SX 2016, Setup Instructions

Page: 11 / 22

3 WORK
9
S00975-10
–
Mount the washer and split pin

.
101019-01
(All 250/300 models)
–
Mount the footrests with the springs and pins. Secure the pins using the wash-
ers and cotter pins.
Pliers for footrest spring (58429083000)
3.5 Installing the front fender
M01144-10
Main work
–
Position the front fender. Mount and tighten screws

and

.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
Finishing work
–
Install the start number plate. ( p. 9)
3.6 Installing the start number plate
M01143-10
(All 125/150 models)
–
Connect the brake line at the start number plate.
–
Position the start number plate.
The holding lugs engage in the fender.
–
Mount and tighten screw  .
Guideline
Remaining screws, chassis M6 10 Nm
(7.4 lbf ft)
M01189-10
(All 250/300 models)
–
Position the start number plate.
The holding lugs engage in the fender.
–
Mount and tighten screw

.
Guideline
Remaining screws, chassis M6 10 Nm
(7.4 lbf ft)
–
Position the brake line and clamp. Mount and tighten screw  .