KTM 125 SX 2011, Setup Instructions

Page: 7 / 17

SET
‑
UP
5
800042-10
–
Mount the footrests with the springs and bolts. Secure the bolts using the washers
and pins.
Plier for footrest spring (58429083000)
800035-10
(250/300 XC)
Warning
Risk of injury Battery acid and battery gases cause serious cauteriza-
tion.
–
Keep batteries out of the reach of children.
–
Wear suitable protective clothing and goggles.
–
Avoid contact with battery acid and battery gases.
–
Keep the battery away from sparks or open fire. Charge only in well
ventilated rooms.
–
Flush with copious amounts of water in case of skin contact. If bat-
tery acid comes into contact with the eyes, flush the eyes with water
for at least 15 minutes and consult a physician.
–
Fill the battery.
Info
Read the notes in the battery package.
–
Recharge the battery. ( p. 8)
–
Install the battery. ( p. 9)
B00097-01
–
Unpack and mount the KTM PowerParts included in the delivery (optional).
Info
Read the accompanying KTM PowerParts installation instructions.
–
Apply the label included in the delivery (optional).
–
Refuel. ( p. 10)
–
Position all controls exactly on the handlebar. Tighten all screws.
–
Print out the current PDI form found on KTM DEALER.NET and perform the delivery
inspection.