background image

WORK

10

3.11

Refueling

Danger

Fire hazard

Fuel is highly flammable.

Never refuel the vehicle near open flames or burning cigarettes, and always switch off the engine first. Be careful that no
fuel is spilt, especially on hot vehicle components. Clean up spilt fuel immediately.

Fuel in the fuel tank expands when warm and can escape if the tank is overfilled. See the notes on refueling.

Warning

Danger of poisoning

Fuel is poisonous and a health hazard.

Avoid contact of the fuel with skin, eyes and clothing. Do not inhale fuel vapors. If fuel gets into your eyes, rinse imme-
diately with water and contact a doctor. Wash affected skin areas immediately with soap and water. If fuel is swallowed,
contact a doctor immediately. Change clothing that has come into contact with fuel.

Warning

Environmental hazard

Improper handling of fuel is a danger to the environment.

Do not allow fuel to get into the ground water, the ground, or the sewage system.

Switch off the engine.

Open the filler cap. (

p. 9)

A

A

400382-10

Fill the fuel tank with fuel up to measurement

.

Guideline

Measurement of

35 mm (1.38 in)

Total fuel tank
capacity, approx.

7.5 l
(1.98 US gal)

Super unleaded gasoline, mixed with
2-stroke engine oil (1:40) (

p. 12)

(125/150 SX)
Super unleaded gasoline, mixed with
2-stroke engine oil (1:60) (

p. 12)

(250 SX)

Total fuel tank
capacity, approx.

11.5 l
(3.04 US gal)

Super unleaded gasoline, mixed with
2-stroke engine oil (1:40) (

p. 12)

(150 XC USA)
Super unleaded gasoline, mixed with
2-stroke engine oil (1:60) (

p. 12)

(250/300 XC)

2-stroke engine oil (

p. 12)

Close the filler cap. (

p. 9)

Summary of Contents for 125 SX 2011


















Reviews: