WORK
9
400240-10
–
Connect the battery charger to the battery. Switch on the battery charger.
Battery charger (58429074000)
You can also use the battery charger to test rest potential and start potential of the
battery, and to test the alternator. With this device, you cannot overcharge the bat-
tery.
Info
Never remove lid
.
Charge the battery with a maximum of 10% of the capacity specified on the
battery housing
.
–
Switch off the charger after charging. Disconnect the battery.
Guideline
The charge current, charge voltage and charge time must not be exceeded.
Charge the battery regularly when the
motorcycle is not in use
3 months
–
Mount the seat. (
3.8
Installing the battery (250/300 XC)
B00361-11
–
Place the battery in the battery holder.
Battery (YTX4L-BS)
–
Reconnect rubber band
.
–
Attach the positive cable and replace the positive terminal cover
.
–
Attach negative cable
.
–
Mount the seat. (
3.9
Opening the filler cap
303502-10
–
Press release button
, turn the filler cap counterclockwise and lift it free.
3.10
Closing the filler cap
303503-10
–
Replace the filler cap and turn clockwise until the release button
locks in place.
Info
Run the fuel tank breather hose
without kinks.
Summary of Contents for 125 SX 2011
Page 2: ......
