TUNING THE CHASSIS
52
9.21
Adjusting the handlebar height
Info
The handlebar stub position must be identical on the left and right of the vehicle.
601438-10
Adjusting the high position of the handlebar stubs:
–
Loosen screw
.
Info
Loosen the screw several turns to prevent damage to the fork paint when
moving the handlebar stub.
601439-10
–
Remove screw
.
601437-11
–
Remove distance sleeve
.
–
All cables routed under the upper triple clamp must now be routed under the
handlebar stub.
–
Push the handlebar stub carefully up to the upper triple clamp.
–
Position distance sleeve
above the triple clamp.
–
Mount and tighten screw
.
Guideline
Remaining frame bolts
M5
5 Nm (3.7 lbf ft)
601440-10
–
Tighten screw
.
Guideline
Screw, handlebar stub
M8
20 Nm
(14.8 lbf ft)
–
Repeat the adjustments on the other handlebar stub.
–
Move the handlebar to and fro over the entire steering range.
» If the cables restrict the freedom of movement of the steering:
–
Correct the cable routing.
601440-10
Adjusting the low position of the handlebar stubs:
–
Loosen screw
.
Info
Loosen the screw several turns to prevent damage to the fork paint when
moving the handlebar stub.
Summary of Contents for 1190 RC8 R Track
Page 1: ...OWNER S MANUAL 2011 1190 RC8 R TRACK Art no 3211609en...
Page 2: ......
Page 107: ...105...
