KTM 1190 RC8 R Track, Owner'S Manual

Page: 43 / 127

SERVICE SCHEDULE
41
8.1
Service schedule
K025N K10A K50A K100A
Check that the electrical equipment is functioning properly. • • • •
Read out the trouble code memory using the KTM diagnostics tool. x
• • • •
Check the measured service values with the KTM diagnostics tool.
x
• • •
Change the engine oil and filter, clean the oil screen.
x
( p. 87) • • • •
Check the oil jet for the clutch lubrication.
x
• • • •
Check the front brake linings. ( p. 68) • • • •
Check the front brake discs. ( p. 66) • • • •
Check the rear brake linings. ( p. 69) • • • •
Check the rear brake disc. ( p. 66) • • • •
Check that brake lines are undamaged and free of leaks. • • • •
Check the rear brake fluid level. ( p. 68) • • • •
Check the free travel of the foot brake lever. • • • •
Check that the shock absorber and fork are leak tight. If necessary and depending on use,
service the fork and shock absorber.
• • • •
Check the swingarm bearing.
x
• • •
Check the wheel bearings for play.
x
• • •
Check the tire condition. ( p. 74) • • • •
Check the tire pressure. ( p. 75) • • • •
Check the chain, rear sprocket and engine sprocket. ( p. 63) • • •
Check the chain tension. ( p. 62) • • • •
Grease all moving parts (e.g., hand lever, chain, ...) and check for smooth operation.
x
• • • •
Clean the dust boots of the fork legs. • •
Check the front brake fluid level. ( p. 67) • • • •
Bleed the fork legs. ( p. 55) • • •
Check the steering head bearing play. • • • •
Check the cylinder and piston. (under difficult riding conditions) x
• •
Check the cylinder and piston.
x
•
Check the connecting rod, conrod bearing, and crank pin.
x
•
Check the crankshaft bearing.
x
•
Check the transmission and shift mechanism.
x
•
Check the oil pressure regulator valve.
x
•
Check the oil pumps and lubrication system. x
•
Check the timing assembly. x
•
Check all engine bearings. x
•
Change the spark plugs.
x
• •
Change the valves, valve springs, and valve spring seats.
x
• •
Check the camshaft and cam lever.
x
• •
Check the cylinder head.
x
•
Check the valve clearance.
x
• •
Check the clutch. x
• •
Check all hoses (e.g. fuel, cooling, bleeder, drainage, etc.) and sleeves for cracking, leaks, and
incorrect routing.
x
• •
Drain the drainage hose of the air filter box.
x
• •
Check the antifreeze and coolant level. • • • •
Check the wiring harness of the throttle valve body for damage and correct routing.
x
• •
Check cables for damage and kink-free routing.
x
• • •
Check that the cables are undamaged, routed without sharp bends and set correctly. • • • •
Check the play in the throttle cable. ( p. 83) • • • •
Check the air filter and air filter box.
x
• • •