13
SERVICE WORK ON THE CHASSIS
105
Preparatory work
–
Raise the motorcycle with the rear lifting gear. (
–
Check the chain tension. (
M00890-10
Main work
–
Loosen nut
1
.
–
Loosen nuts
2
.
–
Adjust the chain tension by turning the adjusting screws
3
left and right.
Guideline
Chain tension
40… 45 mm (1.57… 1.77 in)
Turn the adjusting screws
3
on the left and right so that the markings on the
left and right chain adjusters
4
are in the same position relative to the reference
marks
A
. The rear wheel is then correctly aligned.
Info
The upper part of the chain must be taut.
Chain wear is not always even, so you should check the setting at different chain
positions.
–
Tighten nuts
2
.
–
Make sure that chain adjusters
4
are fitted correctly on adjusting screws
3
.
–
Tighten nut
1
.
Guideline
Nut, rear wheel spindle
M25x1.5
90 Nm
(66.4 lbf ft)
Thread greased
Info
Chain adjusters
4
can be turned by 180°.
Summary of Contents for 1090 ADVENTURE 2017
