5
ENGLISH
Scope of supply
1x license plate holder, short
1x rear subframe
1x brace
1x license plate lamp
61314947100
2x adhesive base
2x bushing 4.2x12x8.5
2x cable binder
44011076140
3x cable sleeve D=8 mm
31008060000
3x hexagon nuts M6
0985060003
4x oval head screw M6x20
0738060202
3x oval head screw M6x18
0738060181
2x washer
0125060001
Preliminary work
- Take off the front rider’s seat (see the Owner’s Manual).
- Take off the passenger seat (see the Owner’s Manual).
Assembly
- Disconnect license plate lamp plug-in connector
(red).
- Disconnect left turn signal plug-in connector
(green).
- Disconnect right turn signal plug-in connector
(gray).
- Remove nuts
.
- Remove original license plate holders (red
, green
and gray
) .
Preassembly short license plate holder
- Fit cable grommets
(supplied) to
license plate holder
(supplied).
- Position rear subframe
(supplied) on
license plate holder
.
- Position brace
(supplied) on license
plate holder
.
- Mount and fi rmly tighten
with washers
and nuts
.
- Mount and fi rmly tighten license plate
lamp
(supplied) with bushings
(supplied) to the license plate holder
.
