ENGLISH
6
5
6
5
6
E
F
4
3
- Mount the speedometer and turn signal on the speedometer holder using
the original screws.
Ensure that the drilled hole of the turn signal faces downward to permit con-
densation to drain.
- Mount the pre-mounted speedometer holder with the original screws.
- Connect the turn signal and speedometer.
- Connect the headlight (see Figure
E
).
- Mount the lamp mask (see the Owner's Manual).
The brake line and speedometer cable must be routed within the headlight
mask (see Figure F). Ensure that the lines are not squeezed or bent.
After mounting the lamp mask, check that all controls are functioning pro-
perly.
- Mount the cable support sleeve
(5)
(included) on the adapter plate.
- Mount the adapter plate
(3)
onto the lamp mask (included) with the screws
M5x25
(4)
(included) and well nut M5
(6)
(included).
