13
Opening the Top Case
- Key position: 90° to the right
.
- Push snap fastener all the way back, press down and at the same
time open the cover.
Fitting sliding plate
- Position the rubber mounts, spacing tubes and sliding guides from
assembly kit
(scope of supply) on the carrier plate
(1
.
- Key position upwards
:
Top Case is closed and locked.
- Key position: 90° to the right
:
Case can be opened and closed.
- Key position: 45° to the right
:
The carry handle pops up automatically.
Case can be opened and closed.
Case is unlocked and can be mounted and taken off.
Closing the Top Case
-Firmly push the cover closed.
The latch snaps audibly into place.
- Turn key back to locked position
and remove.
ENGLISH
