EN
G
L
IS
H
13
B
41
3
40
42
43
C
41
44
7
6
6
6
6
- Remove the 12-V socket
(40)
.
- Using a cone drill, drill a hole at position
B
or
C
in the cockpit trim
(41)
(Ø 24 mm).
When drilling, ensure that you do not damage any of the components.
- Mount the 12-V socket.
- Insert the switch
(3)
and attach it with the nut
(5)
.
- Route the switch cable inward toward the headlight.
- Connect the switch connector
(42)
to the extension cable connector
(43)
.
- Route the extension cable
(6)
back toward the seat.
- Secure the extension cable on the frame with the cable ties
(2)
.
Ensure that the cables can be neither kinked nor pinched.
- Connect the seat power supply with
ACC1
and
ACC2
of the wiring harness.
NOTE:
Connect lines of the same color.
The cables are labeled with an
ACC1
or
ACC2
sticker.
ACC1+
: yellow-red
ACC1-
: brown
ACC2+
: black-red
ACC2-
: brown
- Connect the connector
(44)
with the relay
(7)
.
