![background image](http://html.mh-extra.com/html/kti-networks/ksc-240/ksc-240_installation-manual_2007344034.webp)
-34-
It also can convert an RS-232 device into a receiver node in this point-to-
point circuit.
The configuration for a RECEIVER node is:
SW1-4
TXC
Enable RTS/ADC Control for Driver
SW1-6
RXE
Enable Receiver always
SW1-5
RTS-D
Disable RTS control
SW2-1
SDD
Disable ADC control
3.2 RS-422 Multi-drop Network
In this topology there is only one driver sending to one or more receiv-
ers. One termination resistor is recommended at the extreme end of the
bus to eliminate reflections. Up to 10 receivers are permitted under RS-
422. Multiple receive-only nodes may be used for point-to-multipoint
communications.
Summary of Contents for KSC-240
Page 1: ... 1 Industrial RS 232 to RS 485 422 Converter KSC 240 InstallationGuide DOC 070412 KSC 240 ...
Page 7: ... 7 1 2 Specifications This figure shows the important components of the device ...
Page 15: ... 15 The final mechanical dimensions after installingDINrail mounting bracket are ...
Page 17: ... 17 The screw locations and final dimension are shown below ...