-22-
3.2.7 Mirror Configuration
Mirror Configuration is to monitor the traffic of the network. For example, we assume that Port A and
Port B are Sniffer Port and Source Port respectively, thus, the traffic passed by Port B will be copied
to Port A for monitoring.
Parameter description:
Sniffer Mode
Used for the activation or deactivation of Port Mirror function, the switch port
mirror supported Ingress traffic only. Default is disable.
Sniffer Port
Set up the port for monitoring. Valid port is Port 1~24 and default is Port 1.
Source Port
Set up the ports for being monitored. Just tick the check box (t) under the port x
and valid port is Port 1~24.
Note:
When configuring the mirror function, you should avoid setting a port to be a sniffer port and
aggregated port at the same time. It will cause something wrong.
