-22-
2.12.1 Console Commands
Three command sets are provided as follows:
System commands
>System
↵
System>Info
↵
; display system information
Name:
; System name of this switch unit
S/W Version: x.xx
; Software version
H/W Version: x.xx
; Hardware version
MAC address: xx-xx-xx-xx-xx-xx
; MAC address of this switch unit
System>Restore default
↵
; Restore factory default configuration
System>Restore default keepIP
↵
; Restore defaults, but keep IP no changed
System>Name [<name>]
↵
; Assign a system name to the switch unit
System>Reboot
↵
; Reboot the switch unit
Console commands
>Console
↵
Console>Info
↵
; console information
Password:
; password for entering into management interface
Timeout:
; timeout for console connection without user action
Prompt:
; current command prompt used
Console>Password [<password>]
↵
; change password
Console>Timeout [<timeout>]
↵
; change timeout value
Console>Prompt [<string>]
↵
; change prompt string
IP commands
>IP
↵
IP>Info
↵
; IP information
Address: xxx.xxx.xxx.xxx
; IP address
Subnet Mask: xxx.xxx.xxx.xxx
; Subnet mask
Gateway: xxx.xxx.xxx.xxx
; Gateway IP address
Dhcp: disabled
; Gateway IP address
IP>Setup [<ipaddress>[<ipmask>[<ipgateway>]]]
↵
; Setup new IP
IP>Status
↵
; DHCP status when enabled
Dynamic Address: xxx.xxx.xxx.xxx Subnet Mask: xxx.xxx.xxx.xxx
Gateway: xxx.xxx.xxx.xxx dhcp Address: xxx.xxx.xxx.xxx
IP>Dhcp [enable / disable]
↵
; Use DHCP mode or not
