KTI Networks KGD-802 User Manual Download

Page: 45 / 76

-45-

4.6.3.2 Ingress Settings

Configuration

Description

Port

Port number

Tag Aware

Check tag data for every received packet

Tag-aware

- set to activate Tag-based mode

Tag-ignore

- set to use port-based mode and ignore any tag in packet

Keep Tag

Tag is removed from the received packet if exists

Enable

- set to activate tag removal for VLAN-tagged packets

Disable

- set to disable tag removal function

Drop Untag

Drop all untagged packets and priority-tagged packets

Enable

- drop untagged packets and priority-tagged packets

Disable

- admit untagged packets and priority-tagged packets

Drop Tag

Drop all VLAN-tagged packets

Enable

- drop VLAN-tagged packets

Disable

- admit VLAN-tagged packets

[Apply]

Click to apply the configuration change

[Refresh]

Click to refresh current configuration

Note:
1. Priority-tagged packet (VID=0) is treated as untagged packet in the switch.

2. [Tag Aware] setting affects the index used for VLAN classification (VLAN table lookup).

The following table lists the index used:

Ingress [Tag Aware] setting

Received packet type

Tag-ignore

Tag-aware

Untagged

PVID

Priority-tagged (VID=0)

PVID

VLAN-tagged (VID>0)

PVID

Packet tag VID

3. Both [Drop Untag] and [Drop Tag] are set to Disable to admit all packets.

Summary of Contents for KGD-802













































































Search results

Summary of Contents for KGD-802

Reviews:

Related manuals for KGD-802

Brands by name

Popular brands

KTI Networks KGD-802, User Manual

Search results

Summary of Contents for KGD-802

Reviews:

Related manuals for KGD-802

Brands by name

Popular brands