Copper port auto-negotiation mode, speed and duplex configuration by DIP switch settings
With optional model, copper port provide PoE+ power source (PSE) function.
The Link Fault Pass Through function allows link fault status passes through between copper link and fiber
link transparently.
Far End Fault function on fiber port
Supports 802.3x flow control for full-duplex and backpressure for half-duplex
Supports loop-back test between two devices over fiber link
Supports remote twisted-pair status monitoring
Diversified mounting support: desktop, wall, and optional Din-Rail support
Support wide range of fiber options : 1000BASE-X rated, 100BASE-FX rated, multimode fiber, single
mode fiber (short reach up to long reach), Bi-directional single fiber, and CWDM
Management functions
Port configuration control and status monitoring
Support Jumbo frame conversion
Packet filtering
802.1Q Control between two ports
Quality of Service (QoS) control for packet traffic
Support IGMP snooping
Support loop-back test
Support remote twisted-pair status monitoring
In-band embedded firmware upgrade function
Web-based browsing interface
1.2 Product Panels
The following figure illustrates the front panel and rear panel of the device:
-8-