KT&C EZHD-TRF16 User Manual Download Page 38

Page: 38 / 188

User Manual of Digital Video Recorder User Manual

3.1

Introduction to Live View

Live view shows you the video image from each camera in real time. The DVR will automatically enter Live View mode when powered on.

It is also at the very top of the menu hierarchy, thus hitting the ESC many times (depending on which menu you’re on) will bring you to the

Live View mode.

Live View Icons

In the live view mode, there are icons at the top right of the window for each channel, showing the status of recording and alarms for the

channel, so that you can know whether the channel is recording, or whether there are alarms as soon as possible.

Table 3. 1

Description of Live View Icons

Icons

Description

Alarm (video loss, tampering, motion detection or sensor alarm)

Record (manual record, schedule record, motion detection or alarm triggered record)

Alarm & Record

Event/Exception (motion detection, sensor alarm or exception information. For details,

see

Chapter 8.6 Handling Exceptions.

)

Summary of Contents for EZHD-TRF16





























































































































































































Search results

Summary of Contents for EZHD-TRF16

Reviews:

Brands by name

Popular brands

KT&C EZHD-TRF16, User Manual

Search results

Summary of Contents for EZHD-TRF16

Reviews:

Brands by name

Popular brands