KT&C EZHD-TRF16 User Manual Download Page 35

Page: 35 / 188

User Manual of Digital Video Recorder User Manual

Delete the IP camera

Advanced settings of the camera

，

Update the IP camera

2.3.2

Editing the Connected IP Cameras and Configuring Customized

Protocols

After adding the IP cameras, the basic information for the cameras displays in the OSD, and you can configure the basic settings for the IP

cameras.

Steps:

Click the

icon to edit the parameters; you can edit the IP address, protocol (at this time only IPCAM is supported) and other

parameters.

Figure 2. 16

Edit the Parameters

Channel Port:

If the connected device is an encoding device with multiple channels, you can choose the channel to connect by

selecting the channel port No. in the dropdown list. At this time, only Channel 1 is supported.

Click

to save the settings and exit the editing interface.

To edit advanced parameters:

Steps:

Drag the horizontal scroll bar to the right side and click the

icon.

Summary of Contents for EZHD-TRF16





























































































































































































Search results

Summary of Contents for EZHD-TRF16

Reviews:

KT&C EZHD-TRF16, User Manual, Page: 35 / 188

Search results

Summary of Contents for EZHD-TRF16

Reviews: