Installation and operating manual
KT-Elektronik
Updating the firmware
To perform an firmware upgrade of the ModBus-MBus-Gateway, use the software BootManager. At the time of the firmware
update it is not allowed to connect one slave device.
A firmware upgrade for a connected slave device can be carried out using the software BootManager. In this case the
ModBus-MBus-Gateway provides a transparent connection between BootManager and slave device.
Configuration using 5012Config
For the configuration of the connected MBus meters, the software 5012Config is available. This tool can be adjust meter
address, meter type, meter read interval and meter schedule. Also may consider MBus meter data read by the ModBus-
MBus-Gateway.
The software 5012Config is available in German language only.
6
EB_11997_ModBus-MBus-Gateway_EN001
