KT-Elektronik
ModBus-MBus-Gateway
Display and operation
The device has no controls. The device settings are exclusively via a Modbus connection changed. In stand-alone operation,
in which no slave device is connected, the setting of the ModBus-MBus-Gateway has to make by control system BMS. If
one slave device is connected, the setting of the MBus meter configuration can be adjust by using the operation of slave
device.
To indicate operating state and function are 10 luminous dots (LEDs) are located on the front panel of the ModBus-MBus-
Gateway.
LED status
An LED lights up when the value specified for this LED is active.
Send to Slave (RS485)
Receive from Slave (RS485)
Send to Slave (RS232/TTL)
Receive from Slave (RS232/TTL)
Send to Mbus
Receive from Mbus
Operation, Mode
Send to BMS (RS485)
Receive from BMS (RS485)
Status (On → Slave recognized )
There is a special feature of the LED 'Power' in the mode 'update'. In this mode, the LED lights with short breaks.
EB_11997_ModBus-MBus-Gateway_EN001
5