Installation
and
Operation
Manual
39
●
Fix the rack to concrete wall (option)
1. Stick the rack from the packing list to the wall. Use Ø14 driller kit
to drill installation holes according to the hole position of the
formwork.
2. Clean the dust inside the holes, and insert expansion bolt into the
holes. Make the expansion pipe into the wall, screw the bolt, take the
rack, aimed at the hole, then tighten by pipe.
Figure 16
3.
Hang the inverter to rack from the top to bottom, check both sides
and keep the inverter in the right position, and tighten screws in both
sides.
Figure 17
Hang
and
fix
the
inverter