Installation
and
Operation
Manual
26
7.4.4.6 High frequency of electric network
Interface Description
---High frequency of
electric network ---
Input: 50.5
Unit: Hz
Press UP/DOWN to increase or
decrease the input figure, confirm input and
enter into interface of starting-up again
(refer to 7.4.4.7) by pressing ENTER
button; press ESC to cancel input and
return back working interface (refer to
7.4.4), the input figure is between 50.2
and 55. This parameter is changed by grid
standards.
7.4.4.7 Please starting-up again
Interface Description
Please starting-up again!
A prompt that it is required to start the
machine once again, so that the setup
relevant to working will be effective, and it
will return back operational parameter
interface (refer to 7.4.4) within 2 seconds.
7.4.5 485 address
Interface Description
-----485 address-----
Input: 1
Press UP/DOWN to increase or
decrease the input figure, confirm input and
return back setup interface (refer to 7.4) by
pressing ENTER button, press ESC button
to cancel input and return back setup
interface (refer to 7.4); the input numerical
value is between 1 and 32.