KSH International LR-201-DIO, User Manual

Page: 8 / 21

8
1.3.4 LR-201-DIO : LoRa Digital I/O Controller
 CPU : 32 bits MCU ,40 MHz , 16KB SRAM, 128KB Flash ROM
 Support Modbus Protocol
 LoRa : Semtech SX1272

Freq. : ISM band 862 ~ 936MHz
 Receiver Sensitivity : -137 dBm
 Transmit Output Power : 20 dBm
 Sleep Current : 3uA (at power down state )
 TX current < 140 mA@20 dbm , RX current < 10 mA

Security processor ( 128/192/256 bits AES )
 Packet engine up to 256 bytes with CRC
 Antenna : SMA Type , 2 dBi , changeable

Distance : Up To 5000 Meters in free space
 Data Rate : 0.244 ~ 18.2K bps (LoRa) / 300 K bps (FSK)

Application mode : Star
 Digital I/O

Digital Input * 2
3000VDC Isolation Protect ( Active High /Active Low Selectable )
Dry contact : Logic level 0 : close to GND , Logic level 1 : open
Wet contact : Logic level 0 : 0~3 V , Logic level 1 : 10 ~ 30 V
 Digital Output * 2
Relay ( Active High /Active Low Selectable )
120V AC@10A , 240V AC@7A , 24V DC@10A

Setup Tool : Windows Utility
 Power : DC 9 ~ 24V / 150ma @ 9V , 60ma @ 24V
 Led Lamp : SYS (red) , Pairing (green) , Rx(red) , Tx(green)
 Environment: Operating Temperature:-10
℃ 〜
70
℃
Storage Temperature:-20
℃ 〜
85
℃

Dimensions : 160 * 90 * 25 mm ( W * D * H )
 Weight : 350 gm ( not include power )