EN
40
CONNECTIONS
Before powering and switching on the Panel, make sure that all necessary wirings have been executed.
• in presence of GSM Module, verify its connections to the Control Panel board, that the micro SIM be-
ing inserted and that the GSM Antenna has been linked by means of its SMA connector.
• in presence of PSTN Module, verify the connections with the Panel board. Insert the RJ11 connector
both for incoming and outcoming line.
• If present, verify the connection of the integrated Keypad with the BUS terminals
• In the presence of an Internet Network, wire the Ethernet cable to its connector
• if required, execute all wired inputs cablings
• if required, execute all wired outputs cablings
• Make all wirings for the Mains
• Connect the Battery using the provided cables.
For all details on how to realize all connections, please refer to the next paragraphs
TERMINALS
CLAMPS
TYPE
DESCRIPTION
Power supply
Control panels Supply
Connect the output voltage 14,2V
from Power supply
It provides a positive auxiliary power
for connecteddevices to the Control Panels
(13,8V 1A max)
Negative power
Protective Ground
Protective Ground
input
Input terminals
Outputs
Output Terminals Open-Collector (OC)
Serial communication BUS
for integrated keyboard if present
on the front of the Control panel.
+V
+P
-
B
A
+
-V
o1 o2
i1 i4
23
CONTROL PANEL POWER TERMINALS
N
L
N
L
220 VAC
Connect to Protective Ground feeder
