21
Network Camera
User Manual
When the PBC mode is both enabled in the router and the camera, the camera and the
wireless network is connected automatically.
PIN Mode:
The PIN mode requires a Personal Identification Number (PIN) to be read from either
a sticker or the display on the new wireless device. This PIN must then be entered to
connect the network, usually the Access Point of the network.
STEPS
1. Choose a wireless connection on the list and the SSID is shown.
Figure 4.2.2 - Wi-Fi Settings – WPS PIN Mode
2. Choose
Use route PIN code
.
If the PIN code is generated from the router side, you should enter the PIN code you get
from the router side in the Router PIN code field.
3. Click “
Connect”.
Or you can generate the PIN code on the camera side. And the expired time for the PIN
code is 120 seconds.
1.Click “
Generate”
.
2. Enter the code to the router, in the example, enter 48167581 to the router.
Summary of Contents for KSV0010013.300
Page 1: ...Network Camera User Manual...
