Ksenia KSV0010013.300, User Manual, Page: 27 / 82

27
Network Camera
User Manual
• Select the Time Zone.
Select the Time Zone which is the closest to the location of the camera from the drop-
down menu.
> Synchronizing Time by NTP Server.
1) Check the checkbox to enable the NTP function.
2) Configure the following settings:
Server Address
: IP address of NTP server.
NTP Port : Port of NTP server.
Interval
: The time interval between the two synchronizing actions with NTP server.
Figure 6.2.2 - Time Sync by NTP Server
Note:
If the camera is connected to a public network, you should use a NTP server that has
a time synchronization function, such as the server at the National Time Center (IP
Address: 210.72.145.44). If the camera is set in a customized network, NTP software
can be used to establish a NTP server for time synchronization.
>Synchronizing Time Synchronization Manually
Enable the Manual Time Sync function and then click to set the system time
from the pop-up calendar.
Note:
You can also check the Sync with computer time checkbox to synchronize the time of
the camera with that of your computer.
Figure 6.2.3 - Time Sync Manually
• Click
“DST”
tab to enable the DST function and Set the date of the DST period.
Figure 6.2.4 DST Settings
lt.pool.ntp.org