8 Dismantling
28 of 40
KSB Guard
8 Dismantling
WARNING
Incorrect dismantling
Crushing, impact injuries, cuts!
▷
Use suitable tools only.
▷
Wear suitable protective equipment.
8.1 Dismantling the gateway
DANGER
Risk of falling when working at a great height
Danger to life by falling from a great height!
▷
Do not step onto the pump (set) during installation work or dismantling work.
▷
Pay attention to safety equipment, such as railings, covers, barriers, etc.
▷
Observe the applicable local health and occupational safety regulations and
accident prevention regulations.
DANGER
Improper work on electrical connection
Electric shock!
▷
The gateway may only be opened by a qualified electrical technician.
▷
Electrical work may only be carried out by a qualified electrical technician.
1. Disconnect the power supply.
2. Detach the rear adapter of the gateway from the wall bracket.
3. Remove the wall-mounting bracket from the wall.
8.2 Dismantling the transmission and battery unit
WARNING
Work in the immediate vicinity of rotating parts
Risk of hand injury!
▷
Always have this work performed by trained personnel.
▷
Take particular caution when performing this work.
WARNING
Hot surfaces (Pump and piping take on the temperature of the fluid handled.)
Risk of burns!
▷
Do not touch hot surfaces.
1. Disconnect the connecting cable of the sensor unit.
2. Carefully remove the transmission and battery unit from the installation
location. Use a lever tool if necessary.
Summary of Contents for Guard
Page 1: ...KSB Guard Installation Operating Manual ...
Page 4: ...Contents 4 of 40 KSB Guard 11 EU Declaration of Conformity 35 Index 36 ...
Page 38: ......
Page 39: ......