7 Operation
54 of 62
Calio Pro / Calio Pro Z
1157.820/01-EN
7.4.4 Information
Table 27:
Displaying Information
Step 1: Activating the additional function setting mode
▪
Press and hold the control button (
●
) for 10 seconds.
– The additional functions setting mode is active.
– The symbol flashes.
HL
Step 2: Selecting Information
▪
Select the required function by pressing the control buttons (+)
or (-).
In
-
Step 3: Confirming the setting
▪
Press the control button (
●
).
– The pump size and the current firmware version are briefly
shown on the display.
– The display then changes automatically to its normal
operating display.
7.5 Resetting to factory settings
Resetting to factory settings comprises the following settings:
Table 28:
Factory setting
Operating mode
Proportional-pressure Control
Functions
Disables the dual-pump operation (DUAL)
function
Setpoints
50 %
Table 29:
Resetting to factory settings
-
Step 1: Activating resetting
▪
Press and hold the control button (
●
) for 30 seconds.
– The display of the discharge head setpoint extinguishes.
– The pump set has now been reset to factory settings.
