Krups Pump espresso, Manual

Page: 9 / 146

7
ENGLISH
The coffee maker will not be repaired if:
„
descaling is not carried out,
„
there are scale deposits,
„
the accessories have been washed in a dishwasher,
as this is not covered under the guarantee.
A. Descaling the coffee system
„ Unplug the appliance.
„
Insert the filter holder (without coffee) into the appliance and turn it to the right until it
stops.
„
Place a receptacle with a volume greater than ½ litre under the filter holder.
„
Check that the thumb wheel is set to position O.
„ Fill the tank with a mixture comprised of 3 parts water to 1 part vinegar or citric/sulphamic
acid (total volume of mixture: 500 ml)
„
Plug the appliance in. Turn on the appliance by pressing the On button.
„
Set the selection button to the espresso position. When the espresso indicator light
switches on, turn the thumb wheel to the left and allow the mixture to flow through (¼ of
the volume).
„
Stop the appliance by pressing the On/Off button and leaving the selection button set to
Espresso .
„
Wait 5 to 10 minutes, then repeat the process twice more.
„
Make sure that the tank does not fully empty (if removing, refer to the paragraph: FIRST
USE
).
B. Rinsing
IMPORTANT!
After descaling, rinse 2-3 times using clean water (no coffee), as described
in the "FIRST USE" paragraph.
Do not forget to rinse the nozzle. The appliance is now descaled and ready for use again.
GUARANTEE
Your appliance is under guarantee; however, any connection errors, handling mistakes or
use of the machine for purposes other than set out in the instructions will void the guarantee.
This appliance is under guarantee for domestic use. Any other type of use will void the
guarantee.
Repairs to the machine caused by a failure to descale it shall not be covered by the
guarantee.
For any After-Sales or spare parts issues, please consult your retailer or an approved
servicing centre.