Krups Pump espresso, Manual

Page: 12 / 146

10
ELECTRICAL OR ELECTRONIC PRODUCT END OF LIFE
Help protect the environment!
Your product contains a number of recoverable or recyclable materials.
Take these to a collection centre, or to an approved service centre for
processing.
PROBLEMS POSSIBLE CAUSES SOLUTIONS
The appliance does not
work. The pump is disabled due
to a lack of water. Fill the water tank and
restart the pump (refer to
the section:
FIRST USE) .
Avoid emptying the tank
completely.
The removable water tank
is incorrectly positioned. Position the water tank
correctly.
The appliance is not
connected. Ensure that the appliance is
switched on.
The nozzle does not work
or produces little foam. The foam nozzle is not
correctly installed. Check that the accessory
is correctly mounted on
the appliance: remove then
re-install it on the hinged
arm using a firm upward
movement.
The milk is too hot. Use fresh, pasteurised or
UHT milk that has been
recently opened.
If it is not possible to determine the cause of the fault, consult an approved retailer. Never
disassemble the appliance! (if the appliance is disassembled, this will void the guarantee).