14
15
Warning!
Never put more than two measures into the ground coffee
channel.The channel is not a store for ground coffee. Nor
should you ever pour in less than one measure, otherwise the
preparation of the espresso will stop automatically. Use only
ground coffee beans and not powdered coffee or instant
granules.
• Press the control
(
17
a)
.The indicator light
«ground coffee»
flashes and the indicator
lights
«
1
normal cup»
and
«
2
normal
cups»
come on.
• Press the control or according to
your own choice
(
17
b)
.
You can cancel any accidental pressing of the
control by pressing the controls or
Place a container under the coffee outlets
because rinsing will be performed automatically.
3
. «Personalised» setting of the quantity of coffee
To make a «personalised» setting for a particular cup:
• Turn the knob (k) to (large espresso).
• Press button or .
• Once the level of liquid desired is almost reached, turn the dial (k) following
the various graduations until the flow stops.
You now know the position to use for your cup.
The quantity for two cups is always automatically double the quantity for one cup.
4
. Stopping the flow of coffee
If you wish to stop the flow of coffee press one of the following controls:
,
,
,
or
.
The operation will stop and the used coffee is automatically ejected into the
coffee collector.
Using Steam
1
. Preparing steam
Steam is used to froth the milk to whip up a cappuccino and also to heat liquids.
As the production of steam requires a high temperature, the appliance allows for a
preheating phase for steam.
• Press the preselection for steam button
for about one second
(
18
)
.
The indicator light
«steam»
flashes.
Once the preheating phase is complete, the
«steam»
indicator light stays on and you can
now start producing steam.
It is possible that a little water may run out of the steam nozzle before each
production of steam.To get rid of this water, proceed as follows:
• Place a container under the steam nozzle
and turn the steam/hot water selector to
the position
(
19
)
.
• As soon as steam comes out of the nozzle,
return the selector to the position and
remove the container.
2
. Preparing frothy milk for cappuccino
A cappuccino comprises one third coffee, one third milk and one third milk froth.
• Fill a large cup
1
/
3
with espresso coffee.
• For best results, place the frothing aid on
the tip of the steam nozzle.
Note!
The frothing aid must be used
only for frothing milk.
• Pour about
100
ml of very fresh cold milk into a narrow jug with a maximum
capacity of
0.5l
and which will fit beneath the steam nozzle of the appliance.
Note!
The milk and its jug must be well chilled.
• Select steam mode (see «
1
. Preparing steam»).
• Hold the jug containing the milk under the jet of steam in such a way that the tip
of the nozzle is completely immersed in the liquid.
KRUPS
KRUPS
Indicator Lights
Indicator Lights
17
a
17
b
18
19
.