background image

r

 Be sure to turn switch to OFF position after each use of

your juicer. Make sure the motor stops completely

before disassembling.

Always use the pusher 

 to push the ingredients into

the feeder tube, never use your fingers or any other

instruments. If food becomes lodged in opening, use

food pusher or another piece of fruit or vegetable to

push it down. When this method is not possible, turn

the motor off and disassemble juicer to remove the

remaining food.

 Safety system: This appliance is fitted with a system

which prevents it from starting unless the juice

extractor elements 

 are correctly attached and the

pulp collector   is in place.

 Do not use appliance for other than 

 use.

 The use of accessory attachments not recommended

by the appliance manufacturer may cause fire, electric

shock or injury.

SAVE THESE INSTRUCTIONS

CAUTION

This appliance is for household use. Any servicing other

than cleaning and user maintenance should be performed

by the nearest authorized KRUPS Service Center (see
Guarantee of Performance).

 Do not immerse base in water.

 To reduce the risk of fire or electric shock, do not

remove the base. No user serviceable parts inside.

Repair should be done by an authorized KRUPS Service

Center only.

Summary of Contents for Optifruit 291












Reviews: