102
101
ENGLISH
MODE MANUEL :
1. Press directly on the button
for the setting you want to
adjust, i.e. the speed selec-
tor
(B1)
or the cooking tem-
perature selector
(B2)
or
the time selector
(B3)
, the
chosen parameter flashes
on the screen
(C5-C6-C7)
.
The program is then in pause mode
and you have the possibility of
restarting by pressing “start” again. If
you have chosen the wrong program
and if you want to cancel it, press and
hold the “stop” button for 2 seconds.
4. When the program has ended,
the appliance sounds 3 beeps.
5. Press the locks
(D2)
and then
remove the bowl assembly
(D)
(See Fig.12)
.
COOKING WITHOUT THE LID
You can brown foods in your bowl
without the lid while stirring and
monitoring the cooking.
(See Fig.16)
.
For this method of cooking you must
select a temperature ranging from
135°C to 150°C. Set the operating
time (up to 20 min).
The COOKING WITHOUT A LID
mode is not suitable for making jams
and milk-based preparations (risk of
overflowing).
2. Then adjust the setting
(s)
using the +/- selector
(B6)
.
For safety reasons, it is not
possible to set a tempera-
ture without setting a cook-
ing time.
3. When you have finished
entering all your settings,
press the
“start”
button
(B5)
. When your appliance
is using cooking mode, the
red indicator light, lights up
to inform you that cooking
has started. When the pro-
gram has started, you have
the possibility of stopping
the appliance at any time
by pressing the
“stop”
but-
ton
(B5)
.
CLEANING YOUR APPLIANCE
The appliance should not be immersed.
Never put the motor unit
(A)
under running
water. Once you have finished using it,
disconnect the appliance.
Clean the bowl immediately after use to
avoid staining.
Press the locks
(D2)
then lift the bowl
assembly
(D)
.
Place the bowl on a flat surface.
Unlock the lid by rotating one quarter of a
turn clockwise. Carefully remove the lid.
Take care with the knives of the ultrablade
knife (F1) and the kneading / grinding
knife (F4) when you are cleaning them
and when you empty the bowl, they are
extremely sharp.
When the parts have cooled down:
– dismantle the detachable spindle
(D3)
,
the seal
(D4)
and the locking ring
(D5)
(See Fig.13)
.
– clean the bowl
(D)
, the detachable
spindle
(D3)
, the seal
(D4)
, the locking
ring
(D5)
, the accessories
(F1)
,
(F2)
,
(F3)
,
(F4)
,
(F5)
, the steam regulator cap
(E1)
,
the lid
(E2)
, the seal
(E3)
,and lid seal
(E4)
using a sponge and some soapy water.
Rinse these different parts under running
water.
For baked-on food, let the bowl soak for
several hours in water and dishwashing
detergent and scrape, if necessary, with
a spatula
(G)
or with the abrasive side of
a sponge.
If there is a build up of limescale in
the bowl, use a damp sponge and, if
necessary, white vinegar.
To clean the motor unit
(A)
, use a damp
cloth. Dry carefully.
To help you with cleaning, the bowl, lid
assembly and accessories are dishwasher
safe, with the exception of the detachable
spindle
(D3 and D4)
and its locking ring
(D5)
(See Fig.14)
.
The accessories, the detachable common
spindle and the parts of the lid may
become slightly discoloured with certain
ingredients such as curry, carrot juice,
etc; this does not represent any danger
for your health or for the operation of your
appliance. To avoid this, clean these parts
immediately after use.
Before using your bowl set
(D)
, make sure
that the electrical contacts under the bowl
are clean and dry.
To preserve the appearance and service
life of the lid of your appliance, hand wash
it. Do not use the abrasive side of the
sponge to avoid scratches.
To not adversely affect the materials of
the bowl
(D)
, ensure that you follow your
dishwasher’s instructions for use, do not
increase doses of salt or dishwasher
products.
IMPORTANT - ‘MAKING YOUR APPLIANCE SECURE’
INSTRUCTIONS ( ‘SECU’ )
Your appliance is
equipped, as stand-
ard, with electronic
motor protection to
guarantee its longev-
ity. This electronic
security safeguards
against incorrect use;
in this way, the motor is properly pro-
tected.
In cases of extreme use which disregard the
recommendations in the instructions (see
paragraph ‘FIRST USE’: potentially exces-
sively large quantities and/or abnormally
long use and/or preparing different recipes
at short intervals), the electronic protection
will be triggered to preserve the motor; in
this case, the appliance will stop functioning
and the message ‘SECU’ will be displayed
on the LCD screen of the control panel to in-
dicate that the appliance is temporarily out
of service.
If ‘SECU’ is displayed on the control pan-
el and your appliance stops working, pro-
ceed accordingly:
Leave your appliance plugged in, do not
press the ‘0/1’ switch
(H)
.
Please refer to the recommendations in
the instructions and readapt your use
of the appliance (see paragraph ‘FIRST
USE’: amount of ingredients/recipe
preparation time/temperature/ type of
accessories).
Allow the motor to cool down for half an
hour.
Restart the appliance by clicking on
the ‘Start / Stop/Reset’ button for two
seconds
(B5)
.
Your appliance is now ready to be used again.
For further information, customer service
department is at your disposal (see details
in the guarantee booklet).
Summary of Contents for i Prep & Cook XL
