Krups HP60A115, Manual

Page: 105 / 120

98
ENGLISH
USE IN UNCONNECTED MODE
USING THE CONTROL PANEL (B)
Selecting an automatic program:
Pastries (list of sub-programs) Soups (list of sub-programs)
Stews (list of sub-programs) Steamed dishes (list of
subprograms)
Powering up your appliance
Your appliance has an on/off switch marked 0/1. Switch it to 1.
The LCD screen will display all the settings as ‘0’.
(See Fig. 9) .
In unconnected mode, the i Prep & Cook XL LCD screen is white.
AUTOMATIC PROGRAM MODE
1. Press the program you
wish to use (B4) . A bright
dot will appear above
the program you have
selected. Each time you
press again, the various
subprograms will be
shown, one after the
other.
4. When you have finished
modifying all your
settings, press the
“start” button
(B5)
to
start the program. When
your appliance is using
cooking mode, the red
indicator light
(B3) lights
up to inform you that
cooking has started.
2. The pre-programed set-
tings can be modified for
the time of a recipe (de-
pending on the chosen
recipe, ingredients and
quantities prepared).
Press the cooking tem-
perature selector
(B2) or
the time selector (B3) :
the chosen setting will
flash on the screen
(C6-
C7).
5. When the program has ended, the
appliance sounds 3 beeps.
6. At the end of the soups, P2 and P3 slow
cook and steam cooking programs,
the appliance will automatically switch
to keep-warm mode for 45 minutes to
keep your meal hot until it is ready to
serve. On slow cook programs P2 and
P3 and in manual mode, the appliance’s
motor operates at a specific speed, to
keep the food in good condition and
prevent it from sticking to the bottom
of the bowl. To stop the keep-warm
mode, just press the ‘stop’ button
(B5)
. The keep-warm mode will stop
automatically if you open the lid, press
the triggers
(D2) or remove the bowl.
3. Adjust the setting (s)
using the +/- selector
(B6) .