Krups Evidence Eco-Design EA897, Manual

Page: 44 / 201

67 66
ENGLISH
PREPARING DRINKS
DRINKS AVAILABLE FROM THIS MACHINE AND POSSIBLE SETTINGS:
Drinks
Approximate
size
Recommended
volume
Coffee
strength
X2
Extra Shot
Ristretto
Short espresso with body
M = 20 ml
L = 25 ml
XL = 35 ml
L
  
Espresso
Full-bodied espresso with pronounced aromas, covered
with a slightly bitter caramel-coloured crema
M = 40 ml
L = 55 ml
XL = 70 ml
M
  
Long coffee
Higher in caffeine but lighter on the palate. Very popular
in the morning
M = 80 ml
L = 120 ml
XL = 180 ml
L
  
Americano
Double long espresso combined with hot water
M = 90 ml
L = 120 ml
XL = 150 ml
L
  
Cappuccino
A balance between milk, foam and coffee
M = 120 ml
L = 180 ml
XL = 240 ml
L
  
Caffe Latte
Milk foam with a subtle coffee flavour
M = 200 ml
L = 280 ml
XL = 350 ml
L   
Latte Macchiato
A large helping of milk, a gourmet Espresso with milk foam
M = 190 ml
L = 250 ml
XL = 340 ml
L   
HOT WATER
M = 100 ml
L = 200 ml
XL = 300 ml
L 
Hints & Tips
Every time you choose a drink, the machine will use the most recent settings.
For each recipe, you can increase the volume of your drink during the recipe.
FOR YOUR INFORMATION, YOUR MACHINE WILL AUTOMATICALLY PERFORM THE FOLLOWING
STEPS TO PREPARE YOUR DRINK:
For coffee recipes For milky recipes not including Caffe Latte: For Caffe Latte:
1. Grinding the coffee beans
2.
Compaction of the grinding
3. Pre-infusion (some drops may
fall into your cup at this stage)
4. Percolation
1. Preheating stage
2.
Milk frothing
3. Grinding the coffee beans
4.
Compaction of the grinding
5. Pre-infusion (some drops may fall into
your cup at this stage)
6. Percolation
1. Grinding the coffee beans
2.
Compaction of the grinding
3. Pre-infusion (some drops may fall
into your cup at this stage)
4. Percolation
5.
Preheating stage
6. Milk frothing
AMERICANO
For this recipe, your machine will make two espressos one after the other. There will therefore be two grindings followed
by the addition of hot water.
HOW TO ADJUST THE HEIGHT OF THE COFFEE NOZZLES
For all of the drinks proposed you can lower and reassemble the coffee nozzles according to the size of your cup(s).
HOW TO INSTALL THE CLARIS AQUA FILTER SYSTEM CARTRIDGE
• Your machine should be plugged in and switched on
• The cartridge is placed in the water tank
• Place the cartridge with the numbered ring at the top
• Use the black screwing accessory supplied with the cartridge to properly position and screw in the
cartridge
• On your illuminated screen , press for 3 seconds. A beep will confirm entry into the Installing the filter
menu. Place a container under the nozzles.
• The button flashes and the coffee rinsing image is lit up.
• Press to initiate use of the filter.
• The lights under the recipes will fade in and out during installation.
• Installation is complete when the light is steady again.
GRINDER: ADJUSTING THE GRINDING FINENESS
You can adjust the strength of your coffee by adjusting the grinding fineness of the coffee beans.
Varying the grinding fineness makes it possible to adapt to different types of bean:
- A highly roasted and oily bean will require a coarse grinding,
- A more lightly roasted bean will be drier and will require a fine grinding.
Note:
the finer the grinding, the more powerful the aroma.
Light
(Blonde)
Medium
(Amber)
Strong
(Light
French)
Intense
(French) Very
intense
(Dark
French)
Roasting:
HOW TO ADJUST THE GRINDING FINENESS
Turn the setting button located in the coffee bean container (J) to suit your bean type and the power of aroma desired.
This adjustment must be performed during grinding and notch by notch. After 3 preparations you will notice a distinct
difference in taste.
Caution:
We do not recommend the use of oily and caramelised beans as these are difficult for the grinder to process.
These can damage the machine and lead to poor sensor performance.