Krups ESPRESSO AUTOMATIC SERIE EA9000, Manual

Page: 49 / 206

E
N
F
R
E
S
P
T
47
ENGLISH
PROBLEM / MALFUNCTION PROBABLE CAUSES CORRECTIVE ACTIONS
Nozzle cleaning does not take
place properly.
n
No cleaning liquid.
n
The milk used is not suitable.
n
Check that your preparation does
not boil while heating or frothing.
If it does, reduce the heating
and/or frothing time.
n
Check that the cleaning liquid
bottle is not empty.
n
Carry out a manual cleaning.
n
We recommend that you use cold
milk.
The water tank has been filled,
but the warning message is still
displayed on the screen.
n
The water tank is not fitted
properly.
n
The float at the bottom of the tank
does not move freely.
n
The water tank is scaled up.
n
Check and unblock the float if
necessary.
n
Reinstall the water tank properly
until you feel some resistance.
n
Rinse the water tank under
running water and descale, if
necessary.
The drip tray has been emptied,
but the warning message is still
displayed on the screen.
n
The metal contacts are dirty.
n
Clean and wipe the metal
contacts at the back of the drip
tray.
The used coffee collector has
been emptied, but the warning
message is still displayed on the
screen.
n
The used coffee collector is not
fitted properly.
n
The used coffee collector has
been fitted back too quickly.
n
Refit the used coffee collector.
n
Wait for at least 8 seconds before
refitting the empty collector.
A power failure occurs during
the cycle.
n
The appliance is automatically
reinitialized when it is switched
back on.
There is water underneath the
appliance.
n
The drip tray is not correctly fitted
or is overflowing.
n
Check that the drip tray has been
fitted correctly and empty it if
required.
Danger: Only a qualified technician is authorised to carry out repairs on the power cord and the
220 - 240V electrical system. Failure to respect this exposes you to fatal injuries due to
the presence of electricity! Do not use an appliance that is visibly damaged!
Note:
Programming problems are often resolved by unplugging the appliance for about one minute and
then plugging it in again.
!