15
14
EN
ENGLISH
Using the machine for the first time
Unbox the coffee machine and remove packaging and any other
items that are not part of the product (labels, ties, etc.).
(Fig. 1)
Clean the coffee machine with a damp sponge or cloth.
(Fig. 2)
Run your machine for the first time without coffee, i.e.
by just adding water to the tank (B) up to the maximum
level indicated.
BREWING COFFEE
1. Place the machine on a solid, flat surface. Connect the appliance to
a 120 V~ electrical outlet.
(Fig. 3)
2. Fill the water tank with cold water to desired water level (Max 60fl oz).
(Fig. 4-6)
Note: Do not exceed the Max line (60fl oz) when brewing into
coffee pot. Doing so could cause coffee maker to overflow.
3. Place the coffee pot (J) with its lid on the warming plate (G).
CAUTION:
Make sure the coffee pot is correctly placed on the
warming plate before starting the brew cycle. If the coffee pot
is not correctly positioned on the warming plate, hot water or
coffee could overflow from the appliance.
4. Place filter holder (E) correctly in the coffee machine, then put
permanent filter (D) in the correct position.
(Fig. 7–8)
A
Lid
B
Water tank
C
Measuring spoon
D
Permanent filter
E
Filter holder
F
Holder of the filter holder
G
Warming plate
H
Coffee pot lid
I
Flavortube
J
Coffee pot
K
PROG (Timer programming)
L
HOUR
M
MIN (Minute)
N
STRENGTH (Coffee strength)
O
START/PAUSE
5. Add the desired amount of ground coffee directly into the filter,
then close the top cover (A). The amount of coffee to use will vary
depending on the desired strength and taste.
(Fig. 9)
6. Press the START/PAUSE button (O); an LED light will come on. The
appliance will start the brew cycle and coffee will pass through the
flavortube (I), providing a balanced coffee in each cup.
(Fig. 10)
During the brew cycle, only the START/PAUSE button (O) will work.
7. The cycle can be interrupted at any time by pressing the START/
PAUSE button (O); the LED will turn off.
8. When the brew cycle has finished, the unit will beep. Wait a few
minutes for the rest of the coffee to finish dripping into the coffee
pot (J) before removing it.
(Fig. 11)
9. The coffee maker automatically goes to Keep Warm function after
the brew cycle and the “Time since brew” display will appear on
the LCD screen. Default keep warm time is 2 hours after coffee
brewing has finished. The keep-warm time can be adjusted, see
“Setting the Keep Warm Time” section
(p. 17)
for more information.
Note: You can end the keep warm time any time by pressing the
“START/PAUSE” button (O). The LED light and the appliance will turn
off. Wait a few minutes before making a second pot of coffee.
USEFUL INFORMATION AND TIPS
The amount of coffee prepared will be less than the volume of
water you filled the tank with, as the ground coffee and filter
partially absorb it.
Approximate cups of coffee
Approximate amount of water (fl oz)
4
20
6
30
8
40
10
50
12
60
DESCRIPTION
