Kruger&Matz DJ-002, Owner'S Manual, Page: 37 / 88

37
Owner’s manual
English
3. The unit stops at the end of the title. However, the title remains in the deck
until another title will be loaded.
3. BASIC ADJUSTMENT OF THE MIXER
1. For basic adjustment set the master controls MASTER CONTROL and
MASTER LEVEL, the crossfader and in both channels the controls GAIN
and the equalizers to mid-position.
2. Advance the two channel faders approx. to 2/3 of the maximum for sufficient
way for fading in and out.
3. Play a title with Deck A and control the deck with the respective gain control
according to the level indication. An optimum level control is obtained if
level values in the 0 dB range are shown at average volume. If the red LEDs
of the output meter light up, there is an overload of the channel. Stop the
playback on Deck A and adjust Deck B in the same way.
4. Adjust the desired sound with the tone controls of the channel. By adjusting
the three tone controls, the high frequencies (control HIGH), the midrange
frequencies (control MID), and the low frequencies (control LOW) can be
boosted or substantially attenuated. With the controls in mid-position, the
frequency response is not affected. Readjust the channel level with the gain
control, if necessary.
5. Adjust the low frequencies for the output signal at the balanced master
output with the control BASS LEVEL.
Virtual DJ KMDJ002