Kruger&Matz DJ-002, Owner'S Manual, Page: 27 / 88

27
Owner’s manual
English
11. BASS TONE EQUALIZER
- Adjust the bass tone of the music of the deck.
12. LOOP SHIFT BUTTON (SHORTEN)
- Half the loop length-the minimum
length of a loop is one computer beat grid (CBG).
13. "LOOP IN" BUTTON - Mark the start point of a loop.
14. "LOOP OUT" BUTTON - Mark the end point of a loop and start looping.
Press it again to quit the loop.
15. LOOP SHIFT BUTTON (LENGTHEN) - Double the loop length-the
maximum length of a loop is 32 CBG.
16. MASTER TEMPO BUTTON
17. PITCH BUTTON
- The pitch button allows you to change the adjustable
pitch range from ±6% to ±100%.
18. PITCH SLIDE CONTROL - Sets the speed (if the button MASTER TEMPO lights
up, the tonal pitch will not be changed). Slide the control up to decrease the pitch,
slide it down to increase it. The pitch percentage is indicated on the display.
19. BUTTONS HOT CUE 1-3
- To store and to call up to three cue points per title.
20. BUTTONS PITCH "BEND +"AND "BEND -"
- The function pitch bend
creates a temporary change of speed. As long as the buttons are pressed,
the title is played slower or faster.
21. PC/LINE TOGGLE - Toggles between the LINE input or PC signal for
playback and control.
22. PLAY BUTTON - To start playback.
23. TOUCH JOG WHEEL - The touch jog wheel is used for scratching or searching.
24. PAUSE BUTTON - To switch to pause and to go to new cue point set up.
25. CUE BUTTON - For return to the beginning of the title or a cue point defined
before (the unit is in pause mode). When keeping the button pressed in
pause mode, the title is momentarily played. As soon as you release the
button the unit instantly returns to the cue point.
26. CHANNEL FADER - Adjusts the channel level.
27. POWER INDICATOR - Lights up when the DJ controller is on.
28. CROSSFADER
- For crossfading between Deck A and Deck B. In mid
position both decks can be heard at the same volume.
29. CONTROL BOOTH VOLUME
- level control for the output booth.
30. EFFECT PARAMETER 1 ADJUSTMENT KNOB - Adjust the first parameter
(if any) of the selected effect.
31. EFFECT PARAMETER 2 ADJUSTMENT KNOB - Adjust the second
parameter (if any) of the selected effect.
32. CONTROL SAMPLE SELECTOR - For selecting and playing samples.