19
Instrukcja obsługi
PL
MIKROFON BEZPRZEWODOWY
• Aby używać funkcji karaoke, należy w przypadku mikrofonu przewodowego umieścić wtyk
kabla do odpowiedniego wejścia (MIC IN) lub w przypadku mikrofonu bezprzewodowego,
włączyć go. Za pomocą pokrętła MIC VOL, dostosować głośność mikrofonu.
• Zmniejszenie zasięgu, zakłócenia lub brak dźwięku mogą być oznakami niskiego poziomu
baterii. W przypadku pojawienia się powyższych, należy niezwłocznie wymienić baterie na
nowe.
• Jeśli mikrofon nie będzie używany przez dłuższy czas, należy przechowywać go bez baterii
w środku.
NAGRYWANIE KARAOKE
1.
Należy podłączyć nośnik danych do portu USB urządzenia.
2.
Podłączyć mikrofon przewodowy do jednego z wejść mikrofonowych (MIC IN) lub włączyć
mikrofon bezprzewodowy.
3.
Nacisnąć i przytrzymać przycisk na pilocie zdalnego sterowania lub panelu tylnym urządzenia,
aby rozpocząć nagrywanie. Nacisnąć, aby zakończyć nagrywanie i odtworzyć nagrany plik.
4.
Nagrania zapisywane są na podłączonym nośniku danych.
BLUETOOTH
1.
Należy upewnić się, że głośnik jest włączony.
2.
Podczas parowania należy umieścić głośnik oraz urządzenie zewnętrzne w bliskiej
odległości.
3.
Nacisnąć przycisk MODE na pilocie zdalnego sterowania lub przycisk INPUT na panelu
tylnym, aby przejść do trybu parowania Bluetooth.
4.
Należy włączyć funkcję Bluetooth na urządzeniu zewnętrznym i wyszukać urządzenia
Bluetooth.
5.
Następnie wybrać i połączyć się z urządzeniem (KM Shield).
SPECYFIKACJA
Głośniki:
Subwoofer: 8”
Głośnik wysokotonowy: 1”
Impedancja: 3 Ohm
Czułość: 350 mV
Pasmo przenoszenia: 80 Hz – 20 kHz
Stosunek S/N: >= 90 dB
Wejścia/wyjścia:
Wejście AUX (jack 3,5 mm)
Wejście gitarowe (jack 6,3 mm)
2x wejście mikrofonowe (jack 6,3 mm)
Port USB
Slot na kartę SD