9
Krowne Metal Corporation
|
100 Haul Road
|
Wayne, NJ 07470
Phone: (800) 631-0442
|
Fax: (973) 872-1129
|
www.krowne.com
Installation
1.
This unit has a 6ft. 5/8" I.D. drain hose. The maximum drain height connection must not
exceed 3 ft.[.09 m] above the finished floor.
2.
The drain hose is located at the rear of the glasswasher.
3.
The drain hose is secured to the rear of the machine by a clamp to maintain a goose-neck
bend in the drain hose.
DO NOT REMOVE THE DRAIN HOSE RETAINING CLAMP.
DO NOT KINK, STRETCH OR LENGTHEN THE DRAIN HOSE.
4.
Install the drain hose to a "WYE" drain fitting. Connection to a "TEE" fitting will prevent the
glasswasher from draining completely.
5.
The maximum drain flow is 15 US gpm/12.5 Imp gpm/57 Lpm.
6.
Make sure the drain hose does not kink. Kinks will prevent the glasswasher
from draining completely, and the glasswasher will overflow out the front door.
ATTENTION
Do not connect the drain hose to a disposer. The glasswasher will not drain correctly.
The glasswasher flexible drain hose
must be connected to a WYE fitting.
Do not connect the glasswasher
flexible drain hose to a TEE fitting.
Drain Connection
Summary of Contents for GWD-24
Page 48: ......
