8
Krowne Metal Corporation
|
100 Haul Road
|
Wayne, NJ 07470
Phone: (800) 631-0442
|
Fax: (973) 872-1129
|
www.krowne.com
1.
The unit has a 7 ft./1.8 m flexible hot water fill hose with a 3/4"
female garden hose connector.
2.
A 1/2" or larger main incoming supply line should be installed to the glasswasher.
3.
A 1/2" or larger shut-off valve should be installed in the main water supply as close to the
glasswasher as possible for service.
4.
The machine has a built-in flow control. The incoming hot water supply pressure must be between
25-95 psi/173-655 kPa.
5.
The hot water supply must provide a minimum of 140°F/60°C, measured at the glasswasher.
Installation
ATTENTION
Plumbing connections must comply with national, local plumbing and sanitary codes.
IMPORTANT
Make sure that the flexible water supply and drain hoses are not kinked.
Water Connection
Summary of Contents for GWD-24
Page 48: ......
