![background image](http://html1.mh-extra.com/html/krown/portaview-20-plus/portaview-20-plus_user-manual_2005026009.webp)
8
TO SETUP YOUR PORTAVIEW PLUS
Place your PortaView Plus near your telephone. The power unit is connected to a regular power outlet
and the PortaView Plus is used with your telephone.
• Be sure that the ON/OFF switch on the TDD is OFF.
• Plug small end of adapter cord into small hole at back of TDD.
• Plug AC Adapter/Charger into an electrical wall-outlet.
• Keep both ends plugged in even when machine is not being used for a telephone call.
Your PortaView Plus has Direct Connect. Plug one end of your modular cord into the telephone wall
jack. Plug the other end into the hack on the back of your PortaView Plus.
THE LIGHTS AND SWITCHES
Phone Light
Shows sounds heard on the telephone line.
Power Light
Show status of power. When the light shows:
STEADY = Power is ON
FLASHING = Low battery power
NO LIGHT = Power is OFF
Power Switch
This switch turns the power ON and OFF
Print Switch
This switch turns the printer ON and OFF.
I
7
GETTING STARTED
Summary of Contents for PORTAVIEW 20 PLUS
Page 34: ...NOTE 32...