![background image](http://html1.mh-extra.com/html/krown/portaview-20-plus/portaview-20-plus_user-manual_2005026015.webp)
14
THE MEMORY (CONT.)
To move quickly in a stored message, press the [CTRL] key and an arrow key at the same time. The
display will keep showing more text on the side of the arrow until you release the key.
Moves continuously through a
stored message.
When you are done looking at the message, press [CTRL] and [9] (SAVE) to store the message again
and clear the screen.
Saves the message.
EDITING A STORED MESSAGE
To change the information in a stored message, you need to access the area in which the message is
stored (see page 11).
Use the arrow keys to move forward or backward in the text to reach the part you want to change.
Whatever you type in a memory area will replace any material unless you turn on the insert mode
first.
Accesses memory areas or
phone directory.
Chooses area M1 (for example).
To change an entire message:
Type over an existing message to replace it with new information, then type [CTRL] and [9] to save
the new information. You may also erase all the information in a memory area. (see page 12).
To change part of a message:
Move the cursor the point where you want to make a change, and then delete or insert characters at
the point where you want to make the change.
To delete a character:
Type [CTRL] and [7] (DELETE), and the character above the cursor will be deleted. You must press
[CTRL] and [7] for each character that you want to delete.
PRESS:
Deletes a single character.
13
CTRL
+
EFGHIJKLMNO M2
CTRL
+
ABCDEFGHIJ M2
CTRL
+
9
_
CTRL
+
5
MEM 1-5 OR D(DIR)
1
HELLO M1
CTRL
+
7
ELLO P M1
Summary of Contents for PORTAVIEW 20 PLUS
Page 34: ...NOTE 32...