Kronoterm WP4 LF-502, Instructions For Use And Installation

Page: 35 / 56

ID.: 17-16-20-2979-10
35
3.2018
7.3.1 Error Acknowledgement
In the case of one or several errors on the device, the menu displays a new
setting "Error Acknowledgement". After acknowledging an error the device
will restart and check if the cause of error has been removed. If the error has
been removed, the setting "Error Acknowledgement" is not visible in the
menu any more.
Enter "Error
Acknowledgement"
setting with the key
.
Use key to acknowledge errors.
The menu shows up again.
7.3.2 Quick Water Heating
The programme for quick heating is intended for one time quick water heating
with the device and chosen additional heat source at the same time
(chapter
8.3.2) . After achieving a temperature, the quick heating programme switches
off and changes to previous operation mode. The programme is started by
selecting the setting »
START
«.
7.3.3 Basic Operation Programme
Using direction keys and select between basic device operation
programmes. Confirm selection with the key .
NOTE
Additional operation programmes such as "Quick water heating"
(chapter 7.3.2), "Daily schedule" (chapter 7.3.6) , "Vacation"
(chapter 7.3.8), etc. have priority over basic operation programmes.
Operation programme NORMAL Operation programme COMFORT PLUS
Operation programme ECO Operation programme OFF
Operation programme COMFORT Operation programme ADDITIOLAN SOURCE
7.3.4 Temperature Deviation ECO
In the ECO operation programme, the device heats water to desired
temperature while considering a negative deviation. The desired deviation is
chosen with keys
and . Setting is confirmed with the key .
Setting range: 0 °C – 15 °C.
Setting step: 0,5 °C.
7.3.5 Temperature Deviation COMFORT
In the COMFORT operation programme, the device heats water to desired
temperature while considering a positive deviation. The desired deviation is
chosen with keys
and . Setting is confirmed with the key .
Setting range: 0 °C – 15 °C.
Setting step: 0,5 °C.
7.3.6 Daily Schedule