Kronoterm KT-2, Installation Instructions And User Manual

Page: 4 / 12

Id.: 17-16-13-2960-03 | 7.2017 4
5 Connection of Spatial Corrector
Connect a routed 4-wire cable to the terminals A+ , B- ,
GND and +12 V of the spatial corrector KT-2.
NOTE
Connect the cables you have connected to the
spatial corrector KT-2 at terminals A+, B-, GND and
+ 12V to the same terminals in the electrical closet
controller TERMOTRONICTM.
In the case of a prefabricated cable, connect 1, 2 to A+ ; 3, 4 to B- ; 5, 6 to +12 V and 7, 8 to the
GND connection terminal on the spatial corrector KT-2.
NOTE
In the case of a direct connection of the spatial corrector KT-2 on the process module(PLC),
connect the cables from the spatial corrector KT-2 connected to terminals
A+ , B- , GND and
+12 V to the RJ-45 connector. Prepare the RJ-45 connector the same way as the one in the
wiring diagram below. Connect it to the connecting terminal TS on the PLC in electric closet
controller TERMOTRONIC.
UTP link between RJ-45 connector and KT-2 TIA / EIA 568A connection of connector Cable colors
RJ-45
A+ B- GND+12V
KT-1
1 234 5 6 78
KT-2 RJ-45
A+
1
2
B-
3
4
12 V
5
6
GND
7
8
1 green
and white
2 green
3 orange and
white
4
blue
5 blue
and white
6 orange
7 brown white
8 brown
5.1 Binding multiple spatial correctors
6 Management of the spatial corrector
Key Function keys
RETURN: Return from the menu and cancel
MENU: Scroll through menus and confirm
» + « – set the value, move up
» - « – set the value, move down
,
LED indicator of set value